Our second generation 149cc kit is now ready to go! We've made a few updates to make the install process easier and more simplified. We've also eliminated any potential clearance issues and streamlined the manufacturing process even further to help pass on savings to the customer.
Generation 2 updates:
Wider skirt bridges for more squirter clearance
One additional oil control ring lubrication hole compared to the previous piston
Two additional piston skirt lubrication holes compared to the previous piston
Compression on pump gas is now 12:1 to reduce detonation when hot
Kit includes:
55mm Forged Piston with ring kit
55mm Sleeved cylinder
Base and head gasket set
This kit provides a significant horsepower and torque increase across the entire rev range. Expect gains of 30% in the midrange over a bike with intake, exhaust and cam, and double the horsepower of a stock bike at 8500rpm.
Our ECU flash or an aRacer MiniX and AF2 combo will be required for proper installation.
Required supporting mods other than the ECU tuning include an DHM S1 or DHM S1R camshaft, oil cooler kit, crankcase vent and fuel injector. We have options listed below:
Two base gaskets included. Use both the OEM Honda base gasket and the grey paper gasket for pump fuel setups, use only the OEM Honda base gasket for race fuel.
Oil coolers are required. Keep an eye on oil temps.
An NGK CR9E spark plug must be used
Ring gaps must be set during install, please see the setup sheet for further info.
91 octane is the bare minimum, and 93 is preferred.
When using aRacer, download the quickburn for 149cc + S1 cam
DHM 149cc Big Bore Kit for the 2022+ Honda Grom/Monkey (Gen 2)
J
James Corkish
Bbk 149cc for grom
Came well boxed with ring gaps set all, went togther well and with a dynojet ecu flash and 30 miles under its belt it seems to go great planned dyno run next week to make sure it's all good cheers for the help
M
Miguel
Best thing ever ! And I installed it myself!! Plus Alex from dhm was really good on helping me out with any questions!! Best customer service!! 5⭐️
B
Buck
Blew it up
Recently got my build back from tuning. Was able to get ~15hp with the BBK and cam. Got er up to 78mph and held it for a couple minutes. Do Not. Things overheated and were damaged. Functional but damaged. Point being, I’m back purchasing and building again, this time with a bigger throttle body and intake manifold. Aiming for ~20hp. Although, this time keeping it out of redline. That’s a review.