Installed on my buddies bike and woke it up. Easy install and worth it. Paired it with an aracer but have previously used dhm flashing services in the past for other bikes with great sucess
Loving this upgrade! Makes more torque right off idle all the way up thru the power band. Was an afternoon in the garage and worth every hour. Cant wait to go big bore next summer!!
Well about a month in my build and about <200 mile the hi comp piston failed!!! Blew out the intake side. Was Not impressed with the performance at all. Now failure. I have pics too.
DHM High Compression Stock Bore Piston for the 2022+ Honda Grom / Monkey
These folks set the bar fo thier service and help.
I am tearing down my new 2022 Honda Monkey it has me on nerves edge. No manual. I've got a new intake, pistion and cam, along with a new exhaust. Must have sent 20 emails and they helped me out promptly.
Which set my mind at ease. My ECU should arrive at their shop today or tomorrow 5/9/22 for DHM reflash for upgrades. And I have complete faith that all wi go smoothly. I highly recommend this shop for parts
service and support.
**Professional install is highly recommended. Ring gaps must be set, and base gaskets must be installed properly. Setup sheet is included
DH Motoring Stock Bore Racing Piston (2022+ Grom / Monkey)
We've now produced the first high compression stock bore piston for the new 2022 Grom/Monkey. We took our development experience from the previous generation Grom and CRF110 and applied it to the all new Grom engine and have come up with a lightweight, high compression piston that still utilizes the OEM 12mm pin size.
- ~13:1 compression 50mm stock bore piston
- Larger ring and skirt oiling holes than other pistons on the market
- Larger oil spring to increase oil volume between the oiling rings
- OEM sized skirt area to maintain reliability
- Racing piston ring kit with pins and circlips
- Includes a base gasket spacer and head gasket (you will reuse your stock base gasket as well)
- NGK CR9E spark plug required
- Requires at least 91 octane fuel
- Requires ECU Flash or other Engine Management (aRacer, etc)
Increasing the compression ratio on the stock bore significantly increases the throttle response and overall power of the engine. In comparison to the stock piston, you can expect more low, mid and top end power while maintaining the use of your stock cylinder. We've designed this piston to be as close to the stock weight as possible without sacrificing any structural integrity. It can clear big valve head with 27/22 valve diameters and it will drop right in to your OEM cylinder.
You will need either an ECU flash or some sort of fuel controller for this to run properly.
**Installing this piston requires setting the ring gaps. If you are not comfortable with this, please have your local shop perform the install. Failure to set the proper piston ring end gap can result in premature failure or seizure of the engine. We recommend an end gap of .007-.008" on the top ring and .009-010" on the bottom ring. The silver ring goes on top and the black ring below.